- 2008-2022 Sequoia Suspension
- >
- Dobinsons Front 2.6" MRR 3-Way Adjustable Struts With Springs - Pair
Dobinsons Front 2.6" MRR 3-Way Adjustable Struts With Springs - Pair
SKU:
$1,945.00
$1,945.00
Unavailable
per item
Free Shipping
Fitment
- 2007-2021 Toyota Tundra
- 2008-2022 Toyota Sequoia
Springs included
- Inner Diameter - 3.0"
- Length - 16"
- Spring Rate - 650lb/infront
Tundra/Sequoia spring preload lift height chart (measurement of threads above top spring mount)
- Lift Height - 2.0" - 0-85lb Load - 90mm of top threads
- Lift height - 2.0" - 220-440lb Load - 100mm of top threads
- Lift Height - 2.75" - 220-440lb Load - 110mm of top threads
- Lift Height - 3.0" - 0-85lb Load - 103mm of top threads
- Lift Height - 3.0" - 110-175lb Load - 110mm of top threads
MRA59-A710 Requirements
- Aftermarket UCAs REQUIRED to clear coilover
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing
- Seat height on monotube shocks is adjustable, it is recommended to use listed seat heights ONLY, except in the case micro adjusting for any lean, Preloading coils too much will cause problems and poor ride quality.
- When adjusting for any lean, Toyota IFS has a 2:1 ratio, meaning a 1/2" lean will require 1/4" adjustment to the coil-over
Details
- Sold in pairs
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression - For creepy crawling and cornering
- 15 Stage Rebound - Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminium Race Piston
- 66mm / 2.6" Bodies
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM€?HNBR Sealing System
- TSUGAMITM CNC machined components for precise tolerances
- ParkerTM Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low€?wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design