.

DOBINSONS 1" TO 3.5" IMS LIFT KIT TOYOTA 4RUNNER 2010-2022 KDSS

SKU:
$1,730.00
$1,730.00
Unavailable
per item

FREE SHIPPING

  • 2010-2020 Toyota 4Runner
  • Spring come in Teal, Red or Black
  • Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle
  • Fully re-buildable and re-valvable
  • Zero shock fade in all terrains with full load
  • Superior Designed Nitro Gas Monotube Shocks, thicker walls, longer travel
  • Corrosion resistant (EDP Surface Protection)
  • Direct, bolt-on replacement for easy fitment
  • 50mm hi-flow CNC 6061 Billet alloy piston
  • Heavy duty single piece lower leg
  • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs


Kit Includes

  • Front shocks x 2
  • Front springs x 2
  • Rear shocks x 2
  • Rear springs x 2
  • Front and rear spacers to correct lean


  •  ***2" or more of lift, new UCA's are recommended. Link for UCAs below***


****Coil seat for IMS59-50700 should be set at 213mm(8.38") and IMS59-50574 should be set at 226mm(8.89") from the strut bushing eye. Picture black and white on the listing is to reference how to measure. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.*****


CHOOSE SPRING COLOR

MENTION TEAL, RED OR BLACK IN THE COMMENTS AT CHECKOUT.


Spring/Shock Guide

Front Springs

  • C59-238 - 0.75-1" Lift Stock Front End
  • C59-300 - 1.75" Lift Stock Front End
  • C59-302 - 2.5 Lift With Stock Front End or 2" Lift With 150 lbs Load Front End
  • C59-314 - 2.5" Lift With 80-150 lbs Load Front End
  • C59-352 - 2" Lift With 220-300 lbs Load Front End


Front Shocks

  • IMS59-50700 - Internal Monotube iFP Shock, Suits 0-2.5" Lift
  • IMS59-50574 - Internal Monotube iFP Shock, Suits 2.5-3.5" Lift. Adds 1" Of Lift To Coils


Rear Springs

  • C59-323 - Stock - 0.5" Rear Coils
  • C59-599 - 1" Lift, Stock Rear End
  • C59-505 - 2" Lift, Stock Rear End
  • C50-325 - 2.5" Lift Stock Rear End
  • C59-327 - 2.5" Lift, 220-440 lbs Constant Load
  • C59-329 - 2.5" Lift, 660-880 lbs Constant Load
  • C59-331 - 2.5" Lift 900-1,000 lbs Constant Load


Rear Shocks

  • IMS59-50701 - Internal Monotube IFP Shock - Suites 0-3" Lift
  • IMS59-50705 - Internal Monotube IFP Shock - Suites 0-3" Lift, Softer Valving For Empty Rear Ends


Frequently Purchased Together

Dobinsons UCA

Dobinsons 1" Diff Drop

DOBINSONS Strut Mounts x 2

Assembly With New Strut Mounts

DOBINSONS ADJUSTABLE REAR LOWER CONTROL ARMS

DOBINSONS ADJUSTABLE REAR UPPER CONTROL ARMS

DOBINSONS REAR ADJUSTABLE PANHARD ROD TRACK BAR


Sspring Assembly Instructions


NOTE: For a lift of 3" in the rear, new extended brake lines and minimum of 2" bump stop extensions are required to be used with our long travel rear shocks. At full extension, the stock brake lines could get damaged, and with stock bump stops in place, the shocks will bottom out before the bump stop fully engages, which will quickly destroy the shocks.