The Phoenix Rising - 2007-2021 Toyota Tundra Suspension Lift Kit
SKU:
$1,866.48
$1,866.48 - $2,056.47
per item
Free Shipping
Fitment
- 2006-2021 Toyota Tundra, 5.7, 4x4, With added weight (Front Bumper/Winch)
This kit is designed to provide 4" Front Lift and 3"+ rear lift for Tundras with added weight, 4x4, 5.7.
Not recommended for 2wd, 4.6 or no additional weight.
Kit incudes:
- Bilstein 5100 Front Struts x 2
- OME 2613 Front Springs x 2
- Bilstein 5100 Rear Shocks x 2
- Archive Garage 0.75" Rear Lift Shackles x 2
- OME Replacement Leaf Springs x 2
- Necessary OME Leaf Spring Bushings x 2 sets
- Necessary OME U-bolts x 4
Please allow 1 week lead time for optional strut assembly with new top plates
Tech notes
- Requires aftermarket upper control arms.
- Springs should be set to lowest setting on Bilstein 5100 front struts. Springs alone will give all the lift.
- Models with rear sway bar will require end link modifications to retain sway bar in operation.
- MEDIUM LOAD: Permanent added weight from 400lbs to 770lbs.
Front Coil Spring Details
- Free Height: 435mm
- Spring Rate: 740 lbs/in
- Linear Spring
- Crafted From Micro-Alloyed Spring Steel
- Black Powder-Coat Finish
Rear Leaf Spring Details
- 2.4" rear lift
- MEDIUM LOAD: Permanent added weight from 400lbs to 770lbs.
- Draw-tapered and diamond-cut leaves ensure the load is progressively distributed over a larger surface area, reducing the high stresses that develop at leaf ends, increasing ride comfort and longevity.
- Leaf clamps are bolted to allow the installation of anti-squeak nylon liners.
- Fully scragged to ensure the spring takes a permanent ‘set’ which reduces the risk of sagging.
- Load testing ensures the spring meets the required specification.
- Military wrap designed to provide added safety.
- Re-greasable nylon interleaf anti-friction pads reduce friction at the leaf tips where the load is the greatest.
- A flat axle seat area allows a positive, safe axle mount reducing spring stress and increasing spring life.
- The tension side of all leaves is shot peened to reduce spring stress. This process can double the life of a spring.
- Two-stage leaf pack featured on most rear springs for optimum comfort. When unladen, the vehicle is largely riding on the primary stage, with the secondary stage providing additional support when a heavy load is added.
- Number of Leaves: 4 + 2
- Primary Free Camber: 190 mm
- Spring Rate: 205lbs/in - 330 lbs/in
Part Numbers:
- Bilstein 24-232173 x 2
- OME 2613 x 2
- Bilstein 24-321150 x 2
- Archive Garage Rear Lift Shackles x 1 pair
- OME CS055R x 2
- OME OMESB106 x 2
- OME OMEU53B x 4
Rise up.