- 2010-2023 4Runner Suspension
- >
- Dobinsons 1" - 3.5" MRR 3-Way Adjustable Lift Kit - TOYOTA 4RUNNER 2010-2022
Dobinsons 1" - 3.5" MRR 3-Way Adjustable Lift Kit - TOYOTA 4RUNNER 2010-2022
Free Shipping
Fitment
- 2010-2022 Toyota 4Runner
Details
- All rear heights are measured on a vehicle with 3rd row seating
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression - For creepy crawling and cornering
- 15 Stage Rebound - Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminium Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMITM CNC machined components for precise tolerances
- ParkerTM Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes 2 Front MRR Struts, 2 Rear MRR Shocks and 4 Coil Springs.
- ***2.5" or more of lift, new UCA's are recommended***
Front Spring Chart
- C59-238: 0.75"-1" - Stock Front End Weight
- C59-300: 1.8" - Stock Front End Weight
- C59-302: 2.5" - Stock Front End Weight
- C59-314: 2.5" - 80-150lbs Added Front End Weight
- C59-352: 2.5" - 220-300lbs Added Front End Weight
Front Shock Chart
- MRA59-A700 3-Way Adjustable Shock - Suits 0-2" Lift
- MRA59-A574 3-Way Adjustable Shock - Suites 2.5-3.5"
Rear Spring Chart
- C59-323 - Stock - 0.5"
- C59-599 - 1.5" Lift - Stock Rear Weight
- C59-505 - 2" Lift - Stock Rear Weight
- C59-325 - 2.5" Lift - Stock Weight
- C59-327 - 2.5" Lift - 220-440lbs Added Weight
- C59-329 - 2.5" Lift - 660-880lbs Added Weight
- C59-331 - 2.5" Lift. - 900-1000lbs Added Weight
- C59-675V - 3" Lift - Stock Weight - Variable Rate Comfort Option, LONG TRAVEL - $30 coil upgrade.
- C59-677V - 3" Lift - 200lbs Added Weight - Variable Rate Comfort Option, LONG TRAVEL - $30 coil upgrade.
- C59-701V - 3" Lift - 400-600lbs Added Weight - Variable Rate Comfort Option, LONG TRAVEL - $30 coil upgrade.
- C59-749V - 3" Lift - 600-800lbs Added Weight - Variable Rate Comfort Option, LONG TRAVEL - $30 coil upgrade.
Rear Shock Chart
- MRA59-A701 3-Way Adjustable Shock - Suits 0-3" Rear Lift
- MRA59-A575 3-Way Adjustable Shock - Suites 2-3" Lift - Long Travel
****Coil seat for MRA59-A700 should be set at 213mm(8.38") and MRA59-A574 should be set at 213mm (8.38") for no preload and 226mm(8.89") to add 1" of lift, from the strut bushing eye. Picture black and white on the listing is to reference how to measure. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.*****
****Suspension Kits for vehicles with KDSS will come with additional front and rear spacer to correct lean.
NOTE: For a lift of 3" in the rear, new extended brake lines and minimum of 2" bump stop extensions are required to be used with our long travel rear shocks. At full extension, the stock brake lines could get damaged, and with stock bump stops in place, the shocks will bottom out before the bump stop fully engages, which will quickly destroy the shocks.
FRONT RESERVOIR INSTALL INSTRUCTIONS
FRONT STRUT ASSEMBLY INSTRUCTIONS